60W Two group Switching power supply
Features:·universal AC input
·Small volume,low weight,high efficiency
·Protections:short circuit/over load/over voltage
·LED indicator for power on
·100% full load burn-in test
·2 Year warranty
Model |
D-60A |
D-60B |
D-60C |
Output |
DC Voltage |
Ch1:5v |
Ch2:12v |
Ch1:5v |
Ch2:24v |
Ch1:12v |
Ch2:24v |
Voltage tolerance |
±2.0% |
±6.0% |
±2.0% |
±5.0% |
±3.0% |
±7.0% |
Rated Current |
0.3-6A |
0.2-4A |
0.3-6A |
0.2-2A |
0-3A |
0.2-2A |
Related Power |
60w |
60w |
60w |
Wave&Noise |
60mVp-p |
120mVp-p |
60mVp-p |
150mVp-p |
60mVp-p |
150mVp-p |
DC Voltage ADJ range |
Ch1:-9%~+10% |
Set up,rise,hold up time |
200ms 100ms 30ms |
Input |
Voltage Range |
95 ~132VAC 180-264VAC 47-63HZ 120-370VDC |
AC Current |
2A/115VAC 1A/230VAC |
Efficiency |
78% |
82% |
87% |
AC inrush current |
Cold start current 15A/115V 30A /230VAC |
Leakage current |
<3.5mA/240VAC |
Protection |
Overload |
Related output power 105-150% start overload protection |
Protection type: cutoff output, recovery after restart power |
Over voltage |
Ch2 :115%~135% |
Hiccup mode,recovers automatically after fault condition |
Environment |
Working temp humidity |
-10~+60°C 20%~90%RH |
Storage temp, humidity |
-20~+85°C 20%~90%RH Non-condensing |
Withstand vibration |
10-500Hz,2G 10min/1 cycle, period for 60min, each axes |
Safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation resistance |
I/P-O/P:I/P-FG:O/P-FG: 100M Ohms/500VDC |
Standard |
Safety standard |
Fit UL1012 |
Refer |
Design refer to GB4943,UL60950,EN60950 |
EMC standard |
Design refer to GB9254,EN55022 Class A |
Size |
size |
L159*W98*H38mm |
Package |
0.55kg, 40pcs/22kg |
Note:1.All parameters not specially mentioned are measured at 230VAC input, related load and 25of ambient temperature.
2.Wave&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation. |
|