LED RAIN-PROOF SWITCHING POWER SUPPLY LED DRIVER 50W
Features:
1) High efficiency, low operation temperature
2) Aluminum plastic shell
3) 100% full load burn-in test
4)CE,RoHS
MODEL
|
FY-50-12 / 15V 24V
|
OUTPUT
|
DC VOLTAGE RANGE
|
12V 24V
|
RATED CURRENT
|
4.2 A 3.1A 2.1A
|
CURRENT RANGE
|
0~4.2A 0~3.1A 0~2.1A
|
RATED POWER
|
250W
|
RIPPLE & NOISE (max.) Note.2
|
150mVp-p
|
VOLTAGE TOLERANCE Note.3
|
±10.0%
|
LINE REGULATION
|
±1.0%
|
LOAD REGULATION
|
±2.0%
|
SETUP, RISE TIME
|
1500ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load
|
HOLD UP TIME (Typ.)
|
20ms/230VAC 15ms/115VAC at full load
|
INPUT
|
VOLTAGE RANGE
|
170~264VAC 235~373VDC
|
FREQUENCY RANGE
|
47~63HZ
|
EFFICIENCY (Typ.)
|
82% 82% 84%
|
AC CURRENT
|
0.6 A/230VAC
|
INRUSH CURRENT (max.)
|
COLD START 35A/115VAC 70A/230VAC
|
LEAKAGE CURRENT
|
3.5mA/240VAC
|
PROTECTION
|
OVER LOAD
|
Above 105% rated output power
|
Protection type : Hiccup mode, recovers automatically after fault condition is removed
|
OVER VOLTAGE
|
27.6 ~ 32.4V
|
Protection type: Shut off o/p voltage, clamping by zener diode
|
ENVIRONMENT
|
WORKING TEMP
|
-10~+60°C (Refer to “Derating Curve”)
|
WORKING HUMIDITY
|
20~90%RH non-condensing
|
STORAGE TEMP., HUMIDITY
|
-20~+85°C 10~95%RH
|
TEMP. COEFFICIENT
|
±0.03%(0~50°C)
|
VIBRATION
|
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
|
SAFETY&EMC
|
SAFETY STANDARDS
|
UL8750, CSA C22.2 No. 250.0-08 approved ; Design refer to TUV EN60950-1
|
WITHSTAND VOLTAGE
|
I/P-O/P:3.75KVAC
|
ISOLATION RESISTANCE
|
I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH
|
EMC EMISSION
|
Compliance to EN55015, EN61000-3-2 Class A, EN61000-3-3
|
EMC IMMUNITY
|
Compliance to EN61547, EN61000-4-2,3,4,5,6,8,11, light industry level(surge 2KV), criteria A
|
OTHERS
|
|
|
|
|
PACKING
|
0.68Kg; 40pcs/28KG
|
NOTE
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
|
|