Model |
S-201-5 |
S-201-7.5 |
S-201-12 |
S-201-13.5 |
S-201-15 |
S-201-24 |
S-201-27 |
S-201-48 |
Output |
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
Rated Current |
40A |
26.5A |
16.5A |
14.7A |
13A |
8.3A |
7.4A |
4.2A |
Current Range |
0 ~ 40A |
0 ~ 26.5A |
0 ~ 16.5A |
0 ~ 14.7A |
0 ~ 13A |
0 ~ 8.3A |
0 ~ 7.4A |
0 ~ 4.2A |
Rated Power |
200W |
198.75W |
198W |
198.45W |
198W |
199.2W |
199.8W |
201.6W |
Ripple & Noise (max.) Note.2 |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
240mVp-p |
Voltage Adj. Range |
4.5 ~ 5.6V |
6~9V |
10~13V |
12 ~ 15V |
13.5~18V |
20~26.4V |
26 ~ 32V |
41 ~ 56V |
Voltage Tolerance Note.3 |
±2.0% |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load Regulation |
±1.0% |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Setup,Rise, Hold time |
200ms, 100ms, 20ms at full load |
Input |
Voltage Range |
90 ~ 132VAC / 180 ~ 264VAC by switch 254 ~ 370VDC
|
Frequency Range |
47~63HZ |
Efficiency(Typ.) |
74% |
79% |
80% |
80% |
81% |
83% |
83% |
84% |
AC Current |
4.5A/115VAC 2.5A/230VAC |
Inrush Current (max.) |
50A/115VAC 50A/230VAC |
Leakage Current |
<3.5mA / 240VAC |
Protection |
Over Load |
105 ~ 135% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
Over Voltage |
5.75 ~ 6.75V |
9.4 ~ 10.9V |
13.8V~16.2V |
15.53 ~ 18.2V |
18V~21V |
27.6V~32.4V |
33.7 ~ 39.2V |
57.6 ~ 67.2V |
Protection type : Shut down o/p voltage, re-power on to recover |
OVER TEMPERATURE |
≥90°c (RTH3) Detect on inside ambient temperature |
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
Environment |
Working Temperature |
-10 ~ +50°c (Refer to output load derating curve) |
Working Humidity |
20~90% RH Non-condensing |
Storage temp.& humidity |
-20~+85°C, 10~95%RH |
Temp. coefficient |
±0.03%/°C (0~50°C) |
Vibration |
10 ~ 500Hz, 2G 10min./1 cycle,60min.each along X,Y,Z axes |
Safety & EMC
(Note 4.)
|
Safety Standards |
Design refer to UL1950 |
Withstand Voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
EMI Conduction & Radiation |
Design refer to FCC Part15 J Conduction Class A |
Others |
MTBF |
271.9K hrs min. MIL-HDBK-217F (25 °c ) |
Dimension |
215*115*50mm (L*W*H) |
Packing |
0.93Kg; 12pcs/12Kg/0.92CUFT |
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°c of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
|