| MODEL |
MS-200-5 |
MS-200-12 |
MS-200-15 |
MS-200-24 |
MS-200-27 |
MS-200-48 |
OUTPUT |
DC voltage |
5V |
12V |
15V |
24V |
27V |
48V |
| Voltage tolerance |
± 2% |
± 1% |
± 1% |
± 1% |
± 1% |
± 1% |
| Rated current |
30A |
16.6A |
13.3A |
8.3A |
7.4A |
4.2A |
| Current range |
0~30A |
0~16.6A |
0~13.3A |
0~8.3A |
0~7.4A |
0~4.2A |
| Rated power |
150W |
199.2W |
199.5W |
199.2W |
199.8W |
201.6W |
| Ripple& noise |
150mvp-p |
150mvp-p |
150mvp-p |
180mvp-p |
180mvp-p |
200mvp-p |
| DC voltage ADJ. range |
-9%~+10% |
± 10% |
± 10% |
± 10% |
± 10% |
± 10% |
INPUT |
Voltage range |
90~132VAC/180~264VAC(selected by switch), 254~373VDC |
| frequency |
47~63HZ |
| AC current |
4.0A/115VAC, 2.0A/230VAC |
| efficiency |
80% |
83% |
83% |
85% |
85% |
86% |
| Inrush current |
Cold start current 18A/115VAC, 36A/230VAC |
| Leakage current |
< 2.5mA/240VAC |
PROTECTION |
overload |
Rated output power 115%~150% start over load protection |
| protection type: hiccup mode, auto-recovery after fault condition is removed |
| Over voltage |
6.8~8.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
42.6~44.2V |
54.8~56.6V |
| protection type: hiccup mode, auto-recovery after fault condition is removed |
| ----- |
----- |
| ----- |
| ENVIROMENT |
Working temp, humidity |
-10º C~+60º C, 20%~90%RH |
| Storagetemp, humidity |
-20º C~+85º C, 10%~95%RH non-condensing |
| Withstand vibration |
10~500HZ, 2G 10min/1cycle, period for 60 minutes, each axes |
SAFETY STANDARD&
EMC |
Withstand voltage |
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Isolated resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC |
| Safety standard |
DESIGN REFER TO UL1012 |
| EMC standard |
EN55022, CLASSA |
| OTHERS |
Dimension |
199*98*38mm (L*W*H) |
| Weight/packing |
0.6kg/30pcs/19kg/0.034 m³ /1.2CUFT |
| NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25º C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|
带显示导轨电源
接近开关
